NEXO NXAMP4X2 MK2

NEXO’s expertise in DSP control for high-performance loudspeakers is unparalleled in the sound reinforcement industry. And Yamaha has an unrivalled heritage in developing highly efficient and reliable power amplification devices. So when the two collaborate to create a new range of powered controllers, the result is sure to be something special.

Rated at in 4 X 2500 Watts, the NXAMP4X2MK2 combines advanced signal processing with four state-of-the-art Class D amplifiers to create a flexible, light-weight powering and control solution for NEXO loudspeaker systems.

The Nexo NXAMPMK2 ultra-low distortion Class D amplifiers combine 24-bit/96KHz converters and 64-bit signal processing to deliver significant advances in sound quality over the already highly regarded previous generation of NXAMPs. Bass is solid and high-end definition is particularly impressive in a sonic performance that is both articulate and rich with detail. Even at low volumes, the sound is noticeably transparent and pure. The amplifiers integrate three new multi core DSPs providing a future-proofed hardware platform, equipped to host new algorithms and run next-generation firmware updates for years to come.

 

KEY FEATURES

  • NEXO and Yamaha collaborate to create the perfect, light weight power and control solution for NEXO loudspeaker systems
  • Achieves significant advances in sound quality over previous generation NXAMPs
  • 4 x ultra-low distortion Class D amplifiers
  • 4 x 2500 Watts
  • All essential parameters accessible via a large colour touchscreen on the front panel
  • Universal 100 – 240 mains voltage range
  • Uses PFC (Power Factor Correction) technology
  • Remote control card fitted as standard

SPECIFICATIONS

Power Specifications
Number of channels 4 amplifier channels, 2 by 2 bridgeable
Max output voltage (no load) 4 x 140 V
Max output power (4 channels mode / 8 Ohms load per channel) 4 x 1200 W
Max output power (4 channels mode / 4 Ohms load per channel) 4 x 1900 W
Max output power (4 channels mode / 2 Ohms load per channel) 4 x 2500 W
Max output power (2 channels mode / 8 Ohms load per channel) 2 x 3800 W
Max output power (2 channels mode / 4 Ohms load per channel) 2 x 5000 W
Power consumption (Standby) 10 W
Power consumption (idle) 200 W
Input to Power Out Specifications
Frequency response 10 Hz - 20 KHz ±1 dB
Input Impedance / Input Sensitivity 20 K Ω / 16 dBu
Dynamic range / TDH + N 110 dB unweighted / Typical 0.01% (Flat setup)
Lantency 580 us on a flat setup
Audio AD and DA converters 24-bits @ 96 KHz
Processing 3x multicore 64-bits processing DSPs

FEATURES

Back Panel features
Analogue audio inputs 4x balanced analogue inputs on XLR3
Power outputs 4×Neutrik Speakon NL-4 outputs
RS232 port 1×DB-9 connector dedicated for DPU connection
GPIO port 1xDB-25 connector with 5x Inputs and 8x Outputs for DMU connection
Expansion slot For networking and digital audio cards, 4x digital audio inputs and remote control
Main sockets 1x Neutrik Powercon NAC3 (1x 20 A)
User interface and controls
Front panel buttons and knobs Rotary encoder with push and backlight, tactile screen
Display 4.3 inches diagonal colour display, WQVGZ, 480 x 272
Main requirements
Mains voltage Universal power supply with active PFC 100-240 Volts (50/60 Hz)
Mains voltage
Power consumption(1/4 max 2 Ω) 3500 W
Dimensions and Certifications
Dimensions 2U 19″ rack, 502mm / 20″ depth, 16.1 kg / 35.3 lbs weight
Electrical safety certification cULus, CB (CE), CCC, PSE, KC
EMC certification CE, FCC
Green status Compliant with ROHS directive